They come in various sizes and can be integrated into the table or used as a standalone device. These devices automatically shuffle the deck of cards and can save time during gameplay. Here are some examples: Automated card shufflers Optionally, you can also add various gadgets and devices to a poker table to enhance the playing experience. Sand the edges of the table, and apply a finish or stain if desired. Make sure the legs are evenly spaced and secure. Table legsĪttach legs to the table using screws and a drill. Make sure the felt fabric is smooth and there are no bumps or wrinkles.Ĭut the excess fabric from the corners, and fold the fabric neatly under the table. Staple the felt fabric to the plywood, starting at the center of the table and working your way out. Place the felt fabric on top of the vinyl fabric, and center it on the table. Felt fabric is commonly used for the playing surface of a poker table. Felt fabricĬut felt fabric to fit the size of the table. Make sure the fabric is smooth and there are no wrinkles or bubbles. Stretch the vinyl fabric over the foam padding and plywood, and staple it to the underside of the table. Leave a few inches of extra fabric on each side to wrap around the table. Make sure the foam padding is evenly spread and there are no bumps or wrinkles.Ĭut vinyl fabric to cover the foam padding and plywood.

You can use 1-2 inches of foam padding, depending on your preference.Īttach the foam padding to the plywood using wood glue. FoamĬut foam padding to fit the size of your table. A standard size is 8 feet long by 4 feet wide, but you can adjust the size to fit your needs.Ĭut a piece of plywood or MDF board to the size you want.

Instructions to build a poker table Table baseĭecide on the size of your poker table.

Design your own poker table